Building
Cables for security systems, intrusion detection, burglar alarm, and for the connection of video door phones, CCTV systems for access control. KNX BUS cables for building automation systems.
Download the catalog SECURITY 2015
Categories
Multicore shielded fire resistant, halogen free (LSZH) cables FTE4OHM1 UNI 9795: 2013 EN 50200 PH 120
STANDARD USE
Signalling, control cables for fixed installation in crowded areas with danger of fire (theaters, banks, stores, shops, multi-storey buildings, schools, hotels, airports, hospitals, etc.)
SPECIAL FEATURES
Fire resistant low smoke, zero halogen, cables for category 1(1) systems suitable to be installed in a single duct, without interposition of separator, with power cables with operating voltage up to 0,6/1 KV.
Data sheet More infoTechnical details:
Conductors
Stranded bare copper conductorsCEI 20-29 cl.5, EN 60228, IEC 60228 ref.
Insulation
Glass/Mica tape and halogen free crosslinked compound CEI 20-11, EN 50363-0 quality E4.Colour code: Red, Black.
Shield
Aluminium/polyester tape helically wound with stranded tinned copper drain wire.
Jacket
Special flame retardant, halogen free, low smoke compound CEI 20-11, EN 50363-0 quality M1, VDE 0207 HM2.Colour: Red.
Elettrical resistance
0,5 mm2: < 39 Ohm/Km0,75 mm2: < 26 Ohm/Km
1 mm2: < 19,5 Ohm/Km
1,5 mm2: < 13,3 Ohm/Km
2,5 mm2: < 7,98 Ohm/Km
Operating temperature
-25°C +90°C(posa fissa)
Bending radius
5 volte il diametro del cavo (posa fissa).
Operating voltage
300 V
Test voltage
2000V
Fire resistance test
CEI 20-36/4-0 PH 120, CEI EN 50200 PH 120(IMQ report CN15S0408511-01)
Flame retardant test
CEI 20-35/1-2, EN 60332-1-2
Non-halogen verification
< 0,5 % (CEI 20-37/2-1, CEI EN 50267-2-1, IEC 60754-1)
Corrosivity of combustion gas
pH: > 4,3 - Conductivity: < 10 μS/mm (CEI 20-37/2-2, CEI EN 50267-2-2, IEC 60754-2)
Smoke density
Transmission of light: > 70% (CEI 20-37/3-1, EN 61034-2)